Smart Water leakage sensor (Zigbee)
zentheme.detail.lengthLabel
34 mm
zentheme.detail.widthLabel
41 mm
zentheme.detail.heightLabel
15 mm
zentheme.detail.weightLabel
0.01 kg
The alpina Smart home water detector warns you as soon as a leak occurs so that you can take immediate action. This is not a superfluous luxury since water damage and inconvenience can often lead to major damage if you act too late. Think of large moisture stains in the ceiling, bulging laminate and even flooded basements. Place the leakage sensor for example in the kitchen near the dishwasher, or in the bathroom near the washing machine, and receive an alarm on your phone as soon as the sensor detects a leak. In this way the sensor protects your home effectively against water damage. The leak detector is IP66 water resistant and has a detection distance of no less than 90 metres. NOTE: The water detector can only be used in combination with the Zigbee Gateway.
Protects your home against water damage
Nobody wants water damage. Repairing water damage after a leak is a big, but often financially burdensome job. Fortunately, the damage can be limited by installing the alpina Smart home water detector in vulnerable places in your home. Think of a place near the dishwasher, sinks, the central heating boiler, washing machine and even in the basement. As soon as the sensor comes into contact with water, you will receive a notification on your smartphone via the alpina Smart home app. The leak detection alarm has a total detection distance of no less than 90 metres.
alpina Smart home app and easy installation
When the alpina Smart home water detector detects a leak in, for example, the dishwasher or washing machine, it can send an alarm or push notification to your phone. This is done via the special alpina Smart home app that you can download for Android and Apple in the Google Play Store and the App Store. To connect the Zigbee water detector to the alpina Smart home app, select the option 'add sub-device' in the app. Press and hold the reset button on the sensor for at least 5 seconds, until the indicator light comes on. Once the installation is complete you can start using the sensor. In the alpina Smart home app, if you have several sensors, you can give each sensor a name. This way you can see in the app exactly which device is having problems and where the leakage is coming from. You can easily place the water detector on a clean and flat surface using the supplied sticker.
IP66 water resistant
The IP value indicates the protection level of a device against water. This standard runs from IP21 to IP69. The higher the number, the more resistant the device is to water and moisture. The alpina Smart home water detector has an IP66 certification. This means that the leak detector is waterproof to rain and waves of water. This means that you can place it close to water sources without affecting the sensor's performance.
Zigbee Gateway
As the water detector cannot connect to your wifi network independently, you can only use the door sensor in combination with the Zigbee Gateway. Within the alpina Smart home range, various products can be connected with each other. Think of the window or door sensor, the climate sensor, the motion alarm and the vibration sensor. This all takes place via the separately purchased Zigbee Gateway. This Zigbee Gateway connects up to 50 different alpina Smart home devices together, allowing them to communicate with each other. The operation and settings of each device, including the Zigbee Gateway, can be edited with the alpina Smart home app.
Packaging contents
- Skart Zigbee leakage sensor
- Quick start guide
| App available for: | Android, IOS |
|---|---|
| Device power input connection: | CR2032 battery |
| Dimensions: | 34 x 41 x 15 mm |
| IP rating: | IP66 |
| Itemnumber: | 26551 |
| Maximum RF output power: | 8.73 dBm |
| Maximum transmit antenna gain: | 2 dBi |
| Operating voltage: | 3V |
| Power support: | 1x CR2032 battery |
| Transmit frequency range: | 2405-2480 MHz |
| Wireless distance Zigbee: | 90m |
| App available for: | Android, IOS |
|---|---|
| Device power input connection: | CR2032 battery |
| Dimensions: | 34 x 41 x 15 mm |
| IP rating: | IP66 |
| Itemnumber: | 26551 |
| Maximum RF output power: | 8.73 dBm |
| Maximum transmit antenna gain: | 2 dBi |
| Operating voltage: | 3V |
| Power support: | 1x CR2032 battery |
| Transmit frequency range: | 2405-2480 MHz |
| Wireless distance Zigbee: | 90m |
871125226551_alpina_Smart_home_Smart_water_leakage_sensor_3V_manualZigbee
